Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. New Beetle
    4. : How do you replace the oil pan on the Volkswagen New Beetle?

Volkswagen New Beetle - Video tutorial

Model: Volkswagen New Beetle MK 2, 9C - Years 1999-2012
Part: Oil pan
Operation: How do you replace the oil pan on the Volkswagen New Beetle?

In order to replace the oil pan on the Volkswagen New Beetle you have to go and lift the car by means of a bridge, so that you can have easier access to the components in the lower part of the engine compartment. In the front part there will therefore be the oil pan, which can be removed from its housing by unscrewing its fixing bolts. Once the bolts have been removed, it will be possible to detach the oil pan from its housing, replacing it with a new spare part which must be properly installed.


Posted on 22 September 2022 by ScegliAuto



How do you replace the oil pump on the Volkswagen New Beetle?
Volkswagen New Beetle (1999-2012 / MK 2, 9C) In order to replace the Volkswagen New Beetle oil pump, all the bolts that secure the oil pan must be removed, as shown in the video. To remove the o
How to replace Volkswagen New Beetle engine oil and oil filter
Volkswagen New Beetle (1999-2012 / MK 2, 9C) Let's see in this guide how to replace the engine oil and the oil filter, performing the regular routine maintenance service of the Volkswagen New Be
Change the oil on the New Beetle
Volkswagen New Beetle (1999-2012 / MK 2, 9C) Do we want to replace the oil and filter on the New Beetle? Let's see how to replace the oil and filter. We open the car door and pull up the engine

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos