Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Golf
    4. : How to replace the lower arm silent block on a Volkswagen Golf?

Volkswagen Golf - Video tutorial

Model: Volkswagen Golf Golf 7, Golf VII, MK 7 - Years 2012-2019
Part: Bushings
Operation: How to replace the lower arm silent block on a Volkswagen Golf?

In this tutorial, we can see how to replace the lower arm silent block in a Volkswagen Golf, which is a very simple operation. To do this, we will need to lift the side we will be working on with a jack, taking all necessary precautions of course. Once we have done this, we locate the silent block in question, then unscrew the fixing bolts with a 16mm socket wrench and another 18mm one. Once this is done, we push out the block by levering it with a large bar and insert the replacement after lubricating its internal hole well.


Posted on 6 April 2023 by ScegliAuto



Front suspension swing arm replacement
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) The oscillating arm of the front suspension is made up of two elements: the actual triangular arm which contains the two silent bloks for fixing to t
Removing the Golf 5 wiper blade
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Removing the damaged windshield wiper blade of the Volkswagen Golf 5? Let's see how it disassembles. We raise the wiper arm: we detach the blade from
Silent blok replacement swinging arm
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) The failure of the silent bloks (rubber bushings) of the swinging arms of the front suspension is a fairly recurring defect: it is possible to remedy

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos