Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Golf
    4. : How to remove the emblem of the VW Golf 6

Volkswagen Golf - Video tutorial

Model: Volkswagen Golf Golf VI, Golf 6, MK 6, 5K1 - Years 2008-2012
Part: Manufacturer's coat of arms
Operation: How to remove the emblem of the VW Golf 6

The steps to replace the emblem of the manufacturer of the Volkswagen Golf 6 are very simple to perform independently. The steps to follow are: - first step, insert an object inside the emblem to lever it up; - second step, rotate the emblem clockwise until it clicks and then remove it; To insert the emblem we must: - first step, rotate counterclockwise until it clicks; Behind the emblem there is a protective grille from external agents that in case of total removal of the emblem must be replaced or cleaned with some compressed air.


Posted on 17 February 2024 by ScegliAuto



How to remove the emblem with the logo on the Vw Golf 6
Volkswagen Golf (2008-2012 / Golf VI, Golf 6, MK 6, 5K1) Let's see how to remove the emblem with the car logo on a rear hatch of the Volkswagen Golf 6 Series. tailgate until it detaches from the bodywork. O
Removal of car manufacturer emblem
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) It may happen that the car emblem fades or deteriorates over time. It is usually attached with a strong adhesive that does not damage the paint. The
How to remove the emblem from the front bumper of the VW Golf 5
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Removing the emblem of the manufacturer from the front bumper of the Volkswagen Golf 5 is a very simple operation to perform independently, also than

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos