Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Yamaha
    3. : Rx 135 : Oil change on Yamaha Rx 135

Model: Yamaha Rx 135
Part: Engine oil
Oil change on Yamaha Rx 135

It is recommended for this motorcycle model to use a 20W-40 synthetic motor oil. Warm up the engine for a few minutes in order to make the oil less dense and facilitate its escape. Unscrew the 12 bolt located under the engine and which acts as a plug for the oil drainage hole. Collect the used lubricant in a container and dispose of it properly. Dry and clean any parts on which the oil has splashed and close the drain hole with its bolt. Prepare about 650 - 700 ml of new lubricant and load it from the hole located near the pedal, under the inscription RX 135, the one with the black plastic cap that can be unscrewed by hand.


Posted on 9 January 2024 by ScegliAuto

This video is currently unavailable


Oil change on Yamaha Rx 135
Rx 135 It is recommended for this motorcycle model to use a 20W-40 synthetic motor oil. Warm up the engine for a few minutes in order to make the oil less d
How do you change the Benelli TnT 135 engine oil?
Tnt 135 In order to replace the Benelli TnT 135 engine oil, you need to unscrew the cap located in the lower part of the crankcase on the right side of the b
How do you replace the engine oil on a Benelli TnT 135?
Tnt 135 The engine oil change on the Benelli TnT 135 is performed by unscrewing the cap located in the lower part of the crankcase on the right side of the b

How do you replace the headlight bulb of the Triumph Daytona 675R?

In order to replace the headlight bulb of the Triumph Daytona 675R, you need to loosen the screws that secure the appropriate protective panels inside the bulbs: these will be immediately below the handlebars, on the sides of the front fork. Once these covering panels have been removed, it will be possible to disconnect the connector connected to the bulb, removing it from its housing; at this point, it will be possible to connect the new bulb to the connector, inserting it into the headlight and verifying that everything works correctly.

Watch the video!


by ScegliAuto

More videos