Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Yamaha
    3. : Sight : How to replace the headlight bulb on the Yamaha Sight scooter?

Model: Yamaha Sight
Part: Headlight bulb
How to replace the headlight bulb on the Yamaha Sight scooter?

In this tutorial, we can see how to replace the front headlight bulb on the Yamaha Sight, a very simple and quick operation. First of all, make sure that the key is not inserted, then unscrew all the fastening screws of the handlebar fairing and, leveraging along the relative joint, detach it from the supports. Next, disconnect the internal power connector, remove the old bulb and insert the replacement one, being careful not to touch the glass directly with bare hands. Finally, follow the reverse procedure to reassemble everything.


Posted on 1 November 2023 by ScegliAuto



How to replace the headlight bulb on the Yamaha Sight scooter?
Sight In this tutorial, we can see how to replace the front headlight bulb on the Yamaha Sight, a very simple and quick operation. First of all, make sure
Replacement of the front headlight bulb of the Yamaha Mio 125
Mio 125 This short guide will show us how to disassemble and replace the headlight bulb of the front headlight of the Yamaha Mio 125 scooter, in simple and q
How to replace the headlight bulb in the Yamaha Ray ZR scooter?
Ray Zr In this tutorial, we can see how to replace the headlight bulb on the Yamaha Ray ZR scooter, a very simple and quick operation. First of all, make su

How to remove the stator of the Peugeot Speedfight 2

Today we will see, in this video tutorial, how to disassemble and replace the stator of the Peugeot Speedfight 2 scooter, following these simple steps. In this case, the disassembly operation is carried out with the engine removed from the bodywork; then, once the rotor has been removed, we can go and unscrew the fixing screws of the stator, in order to remove it from the engine casing together with the electrical wiring, as shown in the video. At this point we are going to replace the component with the new one, with the original spare part; we install the stator in the correct direction, finally adjusting the advance.

Watch the video!


by ScegliAuto

More videos