Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Yamaha
    3. : Yb 125z : How do you replace the front headlight bulb of the Yamaha YB 125Z?

Model: Yamaha Yb 125z
Part: Headlight bulb
How do you replace the front headlight bulb of the Yamaha YB 125Z?

In order to replace the headlight bulb of the Yamaha YB 125Z, you need to loosen the screws that secure the optical group to its housing: these screws will be located on the sides of the headlight, which can then be removed from its seat. Once the headlight has been removed, it will be possible to disconnect its connector at the back: this will allow you to remove the bulb from inside its housing, so that the new one can be inserted. After installation, it will be possible to reattach the headlight to check its proper functioning.


Posted on 16 January 2024 by ScegliAuto



How do you replace the front headlight bulb of the Yamaha YB 125Z?
Yb 125z In order to replace the headlight bulb of the Yamaha YB 125Z, you need to loosen the screws that secure the optical group to its housing: these screw
How to replace the front headlight bulbs on the Yamaha R6?
Yamaha R 6 As we can see in this tutorial, replacing the front headlight bulbs on the Yamaha R6 is an extremely simple and quick operation. First of all, make s
How to replace the front headlight bulbs on the Yamaha R6?
Yamaha R 6 Replacing the front headlight bulbs of the Yamaha R6, as we can see in this tutorial, is an extremely simple and quick operation. First of all, make

How to remove the stator of the Peugeot Speedfight 2

Today we will see, in this video tutorial, how to disassemble and replace the stator of the Peugeot Speedfight 2 scooter, following these simple steps. In this case, the disassembly operation is carried out with the engine removed from the bodywork; then, once the rotor has been removed, we can go and unscrew the fixing screws of the stator, in order to remove it from the engine casing together with the electrical wiring, as shown in the video. At this point we are going to replace the component with the new one, with the original spare part; we install the stator in the correct direction, finally adjusting the advance.

Watch the video!


by ScegliAuto

More videos