Do it yourself
Frequently asked questions about cars and motorcycles
Search performed for P20a2 Peugeot
P20a2 Peugeot


How to Remove the Variator Cover from a Peugeot Kisbee
Kisbee
.. Before starting, dismount from your Peugeot Kisbee, position it on its central stand, and if possible, lift it. The variator cover is secured.. …
Django .. To change the transmission oil on the Peugeot Django, you need to loosen the drain plug of the transmission, which is located at the bottom.. …
Tweet 50 .. To replace the transmission on the Peugeot Tweet 50, loosen the screws securing the cover of the casing containing the transmission, located.. …
Elystar 50 .. you begin, remove the left side fairing of your Peugeot Elystar. This will give you access to the carburettor. Start by disconnecting the relevant hoses... …
Speedfight 2 .. To replace the exhaust on a Peugeot Speedfight 2, loosen the screws that secure it to the appropriate supports on the right side.. …
What does error code b1003 indicate in Peugeot cars?
Answer: The b1003 error appears in Peugeot cars when one of the control units installed in the vehicle is in protection mode. In practice, it does not perform... Read all

Posted on 5-04-2023

Read answer
Why is the touch screen of the Peugeot 208 not working?
Answer: If the touchscreen of the Peugeot 208 does not work, there may be several causes: first of all, make sure that the cables and the relative fuse are in... Read all

Posted on 14-12-2021

Read answer
Why is the USB port not working in the Peugeot 208?
Answer: Usually, problems like the one specified in the subject, not only for the Peugeot 208 but for any vehicle, depend on a software problem. By downloadin... Read all

Posted on 11-06-2023

Read answer
How to disassemble the rear light of the Peugeot 2008?
Answer: The rear light of the Peugeot 2008 must be unlocked from the inside by unscrewing the nut which is hidden inside a small compartment in the boot. Once... Read all

Posted on 1-03-2023

Read answer
What to do if the Peugeot 2008 touch screen does not turn on?
Answer: When the touch screen of the Peugeot 2008 does not turn on it could be due to the battery not being charged enough. Try disconnecting the battery and ... Read all

Posted on 31-12-2022

Read answer
(*) Write to request page removal

Pagine correlate: