Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Before you begin, remove the left side fairing of your Peugeot Elystar. This will give you access to the carburettor. Start by disconnecting the relevant hoses. Next, unscrew and disconnect the throttle cable and its housing. At this point, loosen the screw that secures the carburettor to the intake manifold. Once this step is complete, you can remove the carburettor, finishing the disassembly. To install the new carburettor, simply follow these steps in reverse, and you will have completed the replacement.

Updated on 27 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rollers in the Variator of the Peugeot Elystar 50
How to Replace the Rollers in the Variator of the Peugeot Elystar 50
Elystar 50 In this video tutorial, you will learn how to disassemble and replace the rollers in the variator of the Peugeot Elystar 50 scooter in simple and qui…
Replacing the Spark Plug on the Peugeot Elystar 50
Replacing the Spark Plug on the Peugeot Elystar 50
Elystar 50 In today's tutorial, you will learn how to remove and replace the spark plug on the engine of the Peugeot Elystar 50 two-stroke scooter. First, place…
How to Remove the Clutch Bell on a Peugeot Elystar 50
How to Remove the Clutch Bell on a Peugeot Elystar 50
Elystar 50 Today, see the steps that will allow you to remove and replace the clutch bell on a Peugeot Elystar 50 scooter. First, place the scooter on its centr…

Where are the fuses located on the Piaggio Vespa GTS 125?

The fuses of the Piaggio Vespa GTS 125 are located inside the front fairing of the scooter: to access the fuse box, press the ignition switch fully. This will cause the panel located immediately below the ignition switch to open: the fuse box will be positioned inside this panel, in the upper left area. Inside the box, you will find the fuses that control the operation of the front headlamp, the horn, the ABS, etc. After removing the damaged old fuse, insert a new one with the same amperage.

Watch the video!


by ScegliAuto

More videos