Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In order to replace the headlight bulb of the Triumph Speed Twin, you need to loosen the screws that secure the headlight assembly to its housing: these screws will be located on the bottom right and bottom left of the headlight assembly. Once these are loosened, you can proceed to remove the headlight from its housing and disconnect the connectors inside it: the corresponding bulb can now be removed from inside the headlight assembly, so that the new one can be inserted, reassembling all the parts that were just removed.

Posted on 4 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery in the Triumph Speed Twin?
How to Replace the Battery in the Triumph Speed Twin?
Speed Twin In this tutorial, you will see how to replace the battery in the Triumph Speed Twin, a very simple and quick operation. First, ensure that the key is…
How to Replace the Clutch on the Triumph Speed Twin
How to Replace the Clutch on the Triumph Speed Twin
Speed Twin To replace the clutch on the Triumph Speed Twin, loosen the screws securing the clutch cover on the left side of the bike. Once the screws are loosen…
Replacing the Coolant on a Triumph Speed Twin 1200
Replacing the Coolant on a Triumph Speed Twin 1200
Speed Twin In today’s video, we will see how to bleed and replace the coolant or antifreeze on a Triumph Speed Twin 1200 in simple and quick steps. First, remov…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos