Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the clutch lever on the Sherco SEF 300?

Model: Sherco Sef 300
Part:

Video tutorial

To replace the clutch lever on the Sherco SEF 300, you need to loosen the screws that secure the lever to its housing on the left side of the handlebars. Once these screws are loosened, you can unscrew the nut at the base of the lever to disconnect the clutch cable attached to the corresponding lever.

Once the cable is detached, the lever can be removed from its housing and replaced with a new spare part; after installation, ensure that it functions correctly.


Updated on 5 August 2026 by ScegliAuto


Related tutorials

How to Replace the Clutch on a Sherco SEF 300?
How to Replace the Clutch on a Sherco SEF 300?
Sef 300 To replace the clutch on a Sherco SEF 300, you need to loosen the screws that secure the clutch cover, located on the right side of the bike: once th…
How do you replace the clutch of the Sherco SEF 300?
How do you replace the clutch of the Sherco SEF 300?
Sef 300 It will be possible to replace the clutch of the Sherco SEF 300 by loosening the screws that secure the protective cover of the mechanism: this will …
How to Replace the Starter Motor on a Sherco SEF 300?
How to Replace the Starter Motor on a Sherco SEF 300?
Sef 300 To replace the starter motor on a Sherco SEF 300, locate this component, which is found at the lower front part of the frame. Once located, loosen th…

How to Replace the Battery in a Harley-Davidson Sportster Iron 883?

In this tutorial, you will see how to replace the battery in a Harley-Davidson Sportster Iron 883, a very simple and quick operation. Before proceeding, ensure that the key is not inserted for safety. Start by unscrewing the single bolt securing the seat, then remove the left plastic cover by unlocking the relevant clips. Next, remove the 3 fuses, disconnect the 2 terminals starting with the negative, and unscrew the bolt of the mounting bracket. At this point, you can extract the old battery, insert the replacement, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos