Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Coolant in a Honda CB 500F

Model: Honda Cb 500f
Part: Antifreeze coolant

Video tutorial

In this short and simple guide, you will find step-by-step instructions on how to drain and refill the coolant in a Honda CB 500F motorcycle. First, place your motorcycle on a stand and start by unscrewing the drain screw for the antifreeze, located on the water pump casing; let the fluid drain into a container for about ten minutes.

Next, unscrew the radiator cap to allow the fluid to drain more quickly; finally, refill with new fluid suitable for your radiator, filling until you reach the maximum level mark!


Updated on 5 August 2026 by ScegliAuto


Related tutorials

How to Replace the Exhaust of a Honda CB 500F?
How to Replace the Exhaust of a Honda CB 500F?
Cb 500f To replace the exhaust of the Honda CB 500F, loosen the bolt securing it to the corresponding bracket near the rear mudguard: once this bolt is remov…
How to Replace the Front Headlight Bulb of the Honda CB 500F
How to Replace the Front Headlight Bulb of the Honda CB 500F
Cb 500f Today, we will guide you through removing and replacing the front headlight bulb of the Honda CB 500F motorcycle. First, place the bike on its stand …
How to Replace the Air Filter of the Honda CB 500F
How to Replace the Air Filter of the Honda CB 500F
Cb 500f Today, we will go through the main instructions that will allow us to remove and replace the air filter of the Honda CB 500F motorcycle. First, place…

How to Change the Engine Oil on the BMW K1600?

To carry out the engine oil change on the BMW K1600, you need to loosen the drain plug of the oil sump, which is located at the central bottom of the vehicle: once this plug has been unscrewed, you can collect all the used oil in a suitably positioned container. At this point, you can remove the oil filter from its housing on the right side of the bike; after removal, you can top up through the breather located on the right side of the bike. Once topping up is complete, ensure everything is functioning correctly.

Watch the video!


by ScegliAuto

More videos