Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial we can see how to replace the front headlight on the Harley-Davidson Sportster, an extremely simple and quick operation. First of all, make sure that the key is not inserted, so that you can work safely, then locate the screw located on the lower edge of the headlight and unscrew it using a Phillips screwdriver. Next, grab the headlight, separate it from the base, and disconnect the power connector. At this point, all that remains is to transfer the bulb to the replacement, if necessary, and mount it simply by following the reverse procedure.

Posted on 9 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlight on the Harley-Davidson Sportster?
How to replace the front headlight on the Harley-Davidson Sportster?
Sportster .. In this tutorial, you can see how to replace the front headlight on the Harley-Davidson Sportster, an extremely simple and quick operation... …
How to Replace the Front Headlamp on a Harley-Davidson Sportster?
How to Replace the Front Headlamp on a Harley-Davidson Sportster?
Sportster .. how to replace the front headlamp on a Harley-Davidson Sportster, an extremely simple and quick operation. First, ensure that the key is not inserted.. …
How to replace the front headlight on the Harley-Davidson Sportster?
How to replace the front headlight on the Harley-Davidson Sportster?
Sportster .. In this tutorial we can see how to replace the front headlight on the Harley-Davidson Sportster, an extremely simple and quick operation... …

How to Turn Off the "V-Belt" Warning Light on a Yamaha X-MAX 400 Scooter?

In this tutorial, learn how to turn off the "V-Belt" warning light on the Yamaha X-MAX scooter's instrument panel, a very simple and quick operation. Before doing this, ensure you have completed the required maintenance, specifically replacing the drive belt. Start by inserting the key and turning on the ignition, then open the small right glove compartment and unscrew the screw for the upper cover. Once removed, locate the white connector with a jumper attached, disconnect it, wait about 10 seconds, and reconnect it. If successful, the warning light will disappear.

Watch the video!


by ScegliAuto

More videos