|
Do it yourself
| |||
| ||||
|
Model: Kymco Spade 150
To change the engine oil on the Kymco Spade 150, loosen the drain plug located at the central lower part of the bike: once the plug is unscrewed, the oil can flow into a suitably positioned container. After the oil has drained, remove the oil filter located in the same position: after removal, a new replacement part can be inserted. At this point, top up by pouring the necessary amount of oil through the breather on the right side of the bike.
Updated on 6 August 2026 by ScegliAuto
This video is currently unavailable
Related tutorials
Spade 150
In order to replace the engine oil of the Kymco Spade 150, you need to loosen the drain plug of the oil pan, which is located in the central lower pa…
Spade 150
To replace the seat of the Kymco Spade 150, loosen all the corresponding screws that secure the seat to its housing: there are four fixing screws loc…
Spade 150
This tutorial shows how to replace the front headlamp bulb on the Kymco Spade 150, a very simple and quick operation. First, ensure the key is not in…
|
How to Replace the Front Headlight on the BMW F800GS
In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.075
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |