Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Kymco
    3. :
  3. Spade 150
    4. : How do you replace the seat of the Kymco Spade 150?

Model: Kymco Spade 150
Part:
How do you replace the seat of the Kymco Spade 150?

To replace the saddle of the Kymco Spade 150, you need to loosen all the corresponding screws that fix the piece to its housing: there are four fixing screws located on the two side parts of the saddle. The screws are located near the fuel tank and next to the rear shock absorbers: once they have been loosened, it will be possible to completely detach the saddle from its housing, in order to insert the new replacement piece. After installation, the saddle can be fixed with the appropriate screws, inserting them laterally.


Posted on 9 May 2023 by ScegliAuto

How to change the motor oil of a Harley Davidson Shovelhead?

To change the oil of a Harley Davidson Shovelhead, start by warming up the engine for a few minutes to make the oil more fluid and facilitate drainage. Park the motorcycle on a flat and stable surface and turn off the engine. Place a container for collecting the oil under the drain plug of the crankcase. Use a wrench to loosen the drain plug and let the old oil drain completely. Once the oil has drained, clean the drain plug and washer, then put the plug back in place and tighten it carefully. Remove the oil tank cap and use a funnel to slowly pour the new oil into the tank, making sure to use the type and quantity specified in the owner's manual. After adding the oil, replace the oil tank cap and start the engine for a few minutes to circulate the new oil. Turn off the engine and check the oil level, adding more if necessary. Check for any leaks around the drain plug before resuming riding.

Watch the video!


by ScegliAuto

More videos