Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Peugeot Kisbee
Part:

In order to replace the fork of the Peugeot Kisbee, you need to loosen the screws that fix the front wheel to its housing: you will need to unscrew the screws that fix the corresponding nut in order to remove the central axle of the wheel. Then you will need to disconnect the brake caliper from the disc and proceed by unscrewing the screws of the fairings that wrap around the fork: at this point it will be possible to proceed by loosening the screws that fix the fork to the handlebars, in order to insert the new one. This can be fixed to the handlebars, covering it with the fairing and installing the front wheel.

Posted on 3 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Variator Cover from a Peugeot Kisbee
How to Remove the Variator Cover from a Peugeot Kisbee
Kisbee Before starting, dismount from your Peugeot Kisbee, position it on its central stand, and if possible, lift it. The variator cover is secured in plac…
How to Replace the Piston on a Peugeot Kisbee
How to Replace the Piston on a Peugeot Kisbee
Kisbee To replace the piston on a Peugeot Kisbee, completely remove the engine from its housing by taking off the side protective panels and freeing the eng…
How do you replace the exhaust pipe of the Peugeot Kisbee?
How do you replace the exhaust pipe of the Peugeot Kisbee?
Kisbee The exhaust pipe of the Peugeot Kisbee can be replaced by loosening the screws that fix the exhaust terminal to its housing, located near the rear wh…

How to Replace the Battery of the Kymco Agility 125?

To replace the battery of the Kymco Agility 125, lift the seat to access the compartment underneath. At the rear of the under-seat compartment, you will find the battery under the corresponding panel. By unscrewing the screws that secure the panel, you can access the battery underneath, which must be freed from the corresponding securing screws and the appropriate power cables. Once the device is free, insert the new one, connecting and securing it properly, and cover everything with the panel.

Watch the video!


by ScegliAuto

More videos