Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Handlebars on a Benelli Leoncino 500?

Model: Benelli Leoncino 500
Part:

Video tutorial

To replace the handlebars on a Benelli Leoncino 500, loosen the screws at both ends to free the weights from their housing. Once the weights are removed, you can slide off the grips and disconnect all the electronic controls on the handlebars.

At this point, unscrew the bolts securing the handlebars in the centre, allowing them to be completely removed from their housing. Insert the new replacement part into its place, securing it and reinstalling all previously removed parts.


Updated on 6 August 2026 by ScegliAuto


Related tutorials

How to Install the Wing Mirrors on the Benelli Leoncino 500?
How to Install the Wing Mirrors on the Benelli Leoncino 500?
Leoncino 500 To replace the wing mirrors on the Benelli Leoncino 500, loosen the central nut located at the counterweight on the end of the handle. Once the screw…
How to Replace the Battery of the Benelli Leoncino 500?
Leoncino 500 To replace the battery of the Benelli Leoncino 500, loosen the screws securing the seat to its mounting so that it can be removed. Once the seat is r…
How to Replace the Front Indicators on the Benelli Leoncino 500
How to Replace the Front Indicators on the Benelli Leoncino 500
Leoncino 500 In this video tutorial, you will learn how to disassemble and replace the front indicators on the Benelli Leoncino 500 motorcycle by following these …

How to Change the Engine Oil of a Triumph Speed 400?

To change the engine oil of a Triumph Speed 400, start by positioning the bike on a flat surface and ensure the engine is warm but not too hot. Locate the oil filler cap on the engine and unscrew it. Place a collection container under the oil drain plug on the oil sump and unscrew the plug to allow the used oil to drain out. Once the draining is complete, refit the drain plug. Remove and replace the oil filter using an oil filter wrench. Apply a little new oil to the seal of the new filter before installation. Fill the engine with new oil through the filler cap opening until it reaches the recommended level, and you will have completed the change.

Watch the video!


by ScegliAuto

More videos