Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Benelli
    3. :
  3. Leoncino 500
    4. : How do you replace the Benelli Leoncino 500 battery?

Model: Benelli Leoncino 500
Part: Battery
How do you replace the Benelli Leoncino 500 battery?

To be able to replace the battery of the Benelli Leoncino 500 you have to loosen the screws that secure the saddle of the motorcycle to its housing, so that it can be removed. After the latter has been removed, it will be possible to access the underlying battery: this can be removed from inside its housing by unscrewing the screws that secure it and disconnecting the power cables. Once the device has been released, it can be removed completely by connecting a new battery to the cables. After connection, you can place the battery and cover it with the saddle.


Posted on 23 May 2024 by ScegliAuto



How do you replace the seat of the Benelli Leoncino 500?
Leoncino 500 In order to replace the seat of the Benelli Leoncino 500, you need to insert the appropriate key into the lock located on the right side of the motor
How do you replace the Benelli Leoncino 500 air filter?
Leoncino 500 The replacement of the Benelli Leoncino 500 air filter is carried out by completely removing the saddle, so that you can have access to the screws lo
How do you replace the handlebar of the Benelli Leoncino 500?
Leoncino 500 In order to replace the handlebar of the Benelli Leoncino 500, you need to loosen the screws located at its ends, freeing the weights from their hous

How to change the engine oil of a Yamaha MT-03?

To change the motor oil of a Yamaha MT-03, start by warming up the engine for a few minutes to make the oil more fluid. Turn off the engine and place the motorcycle on a center stand to ensure stability. Locate the oil drain plug under the engine. Place a collection tray under the drain plug and use a wrench to unscrew the plug, allowing the oil to drain completely into the tray. Once all the oil has been drained, securely screw the drain plug back in. Find the oil fill cap, located on the side of the engine, and remove it. Use a funnel to slowly pour the recommended amount of new oil as stated in the owner's manual. After pouring the oil, replace the fill cap and tighten it securely. Start the engine and let it run for a few minutes, then turn it off and check for any oil leaks. This ensures that the new oil is evenly distributed in the engine and everything is in order.

Watch the video!


by ScegliAuto

More videos