Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Gasgas
    3. :
  3. Mc 250f
    4. : How to replace the engine oil of the Gasgas MC 250F.

Model: Gasgas Mc 250f
Part: Engine oil
How to replace the engine oil of the Gasgas MC 250F.

In this guide, we will discover the procedure for performing regular maintenance on the Gasgas MC 250F enduro motorcycle, specifically replacing the engine oil. First, we place the motorcycle on a stand and begin to unscrew the oil drain bolt located under the engine, allowing the oil to drain into a container for about ten minutes. Then, we clean the small oil filter found inside, as shown in the video. At this point, we unscrew the fill cap and refill with new oil, suitable for our engine, pouring the correct amount.


Posted on 13 September 2023 by ScegliAuto

How to replace the front brake pads on Kawasaki Z1000

Today we will see, in this short and simple guide, the instructions on how to disassemble and replace the front brake pads of the Kawasaki Z1000 motorcycle. First of all we put the stand on our motorbike and we begin to unscrew the fixing screws of the front brake caliper, in order to remove it from the disc; then we remove the central pin to remove the old brake pads, pressing on the caliper piston to make it retract, as shown in the video. At this point we install the new brake pads, of excellent quality, inserting them in the correct direction, following the video tutorial until the end!

Watch the video!


by ScegliAuto

More videos