Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the engine oil in a Ducati Multistrada 950?

Model: Ducati Multistrada 950
Part: Engine oil

Video tutorial

In this tutorial, learn how to change the engine oil in a Ducati Multistrada 950, a simple and quick operation to perform every 12 months. First, wait until the engine is sufficiently cool, then remove the lower protective cover and place a container underneath the bike.

Next, locate the drain bolt, unscrew it with a 5 mm hex key, and allow all the oil in the system to drain out. Finally, unscrew the filter, tighten the new one, reassemble everything, and pour in the new oil through the designated hole.


Updated on 6 August 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil in the Ducati Multistrada 950 S?
How to Change the Engine Oil in the Ducati Multistrada 950 S?
Multistrada 950 In this tutorial, you will see how to change the engine oil in the Ducati Multistrada 950 S, a very simple and quick operation to perform every 12 mo…
How to Clean the Chain of the Ducati Multistrada 950
How to Clean the Chain of the Ducati Multistrada 950
Multistrada 950 This guide briefly explains how to clean and lubricate the drive chain of the Ducati Multistrada 950, following the instructions below. First, place …
How do you set the clock on the Ducati Multistrada 950?
How do you set the clock on the Ducati Multistrada 950?
Multistrada 950 In order to set the clock of the Ducati Multistrada 950, you need to insert the ignition key into the lock and turn it to turn on the instrument pane…

How to Reset the Service Light on the Gilera Nexus 500

This video shows the procedure to reset the service light on the Gilera Nexus when the light remains on after a service. The procedure is straightforward and takes less than a minute. To reset the light, press the mode button and the odo/set button simultaneously. While holding them down, turn the ignition key to the ON position. Once the instruments are on, release the buttons and press the mode button once. The maintenance light will illuminate; hold the mode button for a few seconds to reset it.

Watch the video!


by ScegliAuto

More videos