Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Gilera Nexus 500

Model: Gilera Nexus 500
Part: Service warning light

Video tutorial

This video shows the procedure to reset the service light on the Gilera Nexus when the light remains on after a service. The procedure is straightforward and takes less than a minute.

To reset the light, press the mode button and the odo/set button simultaneously. While holding them down, turn the ignition key to the ON position.

Once the instruments are on, release the buttons and press the mode button once. The maintenance light will illuminate; hold the mode button for a few seconds to reset it.


Updated on 5 August 2026 by ScegliAuto


Related tutorials

How to Reset the Service and Belt Warning Light on the Gilera Nexus 500
How to Reset the Service and Belt Warning Light on the Gilera Nexus 500
Nexus 500 Discover in this short and simple guide how to reset the service warning light for routine maintenance of the oil change and the belt light on the Gi…
How to Change the Engine Oil and Oil Filter on the Gilera Nexus 500
How to Change the Engine Oil and Oil Filter on the Gilera Nexus 500
Nexus 500 Briefly review the main steps to perform the routine maintenance service by replacing the engine oil and oil filter on the Gilera Nexus 500 scooter. …
Replacing the Number Plate Bulb on Gilera Nexus 500
Replacing the Number Plate Bulb on Gilera Nexus 500
Nexus 500 In this video tutorial, we will see the instructions on how to remove and replace the number plate light of a Gilera Nexus 500. First, unscrew the ce…

How to Replace the Battery in a Harley-Davidson Sportster Iron 883?

In this tutorial, you will see how to replace the battery in a Harley-Davidson Sportster Iron 883, a very simple and quick operation. Before proceeding, ensure that the key is not inserted for safety. Start by unscrewing the single bolt securing the seat, then remove the left plastic cover by unlocking the relevant clips. Next, remove the 3 fuses, disconnect the 2 terminals starting with the negative, and unscrew the bolt of the mounting bracket. At this point, you can extract the old battery, insert the replacement, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos