Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service and Belt Warning Light on the Gilera Nexus 500

Model: Gilera Nexus 500
Part: Service warning light

Video tutorial

Discover in this short and simple guide how to reset the service warning light for routine maintenance of the oil change and the belt light on the Gilera Nexus 500 scooter, as well as on the 250 and 300 models. First, turn off the ignition of your scooter and press and hold the mode button and the button 8 simultaneously, as shown in the video; then turn on the ignition and wait a few seconds before releasing the buttons.

At this point, you will see that the service light will be reset and will disappear from the instrument panel of your scooter!


Updated on 28 April 2026 by ScegliAuto


Related tutorials

Removing the Timing Belt on a Gilera Nexus 500
Removing the Timing Belt on a Gilera Nexus 500
Nexus 500 In this video tutorial, we will see the main steps to remove the timing belt from a Gilera Nexus 500. First, remove the timing cover by unscrewing th…
How to Reset the Service Light on a 2010 Gilera Nexus 300
How to Reset the Service Light on a 2010 Gilera Nexus 300
Nexus 500 To reset the Service light on a 2010 Gilera Nexus 300, start with the ignition off: press and hold the two buttons on the instrument panel, which are…
Replacing the Belt and Variator on the Gilera Nexus 500
Replacing the Belt and Variator on the Gilera Nexus 500
Nexus 500 In today's video, we will see the instructions that will allow us to disassemble and replace the drive belt and variator on the Gilera Nexus 500 scoo…

How to Replace the Clutch on a Kymco Downtown 125?

To replace the clutch on the Kymco Downtown 125, loosen the screws that secure the cover located on the left side of the bike, near the rear wheel. Once the screws are loosened, remove the cover to access the components underneath: the clutch at the rear can be removed by unscrewing the fixing screws and sliding out all the discs that make it up. At this point, insert the new replacement part, reposition the drive belt, and cover everything with the cover.

Watch the video!


by ScegliAuto

More videos