Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a 2010 Gilera Nexus 300

Model: Gilera Nexus 500
Part: Service warning light

Video tutorial

To reset the Service light on a 2010 Gilera Nexus 300, start with the ignition off: press and hold the two buttons on the instrument panel, which are the MODE button and the ODO/SET button. Then, turn on the ignition while holding down the two buttons: at this point, the symbols for the spanner and the belt will start to flash.

Press the MODE button to select the symbol that needs resetting, and once selected, hold the same button to reset the light. Releasing the button will complete the reset, and the light will disappear from the instrument panel.


Updated on 18 April 2026 by ScegliAuto


Related tutorials

How to Reset the Service and Belt Warning Light on the Gilera Nexus 500
How to Reset the Service and Belt Warning Light on the Gilera Nexus 500
Nexus 500 Discover in this short and simple guide how to reset the service warning light for routine maintenance of the oil change and the belt light on the Gi…
Removing the Timing Belt on a Gilera Nexus 500
Removing the Timing Belt on a Gilera Nexus 500
Nexus 500 In this video tutorial, we will see the main steps to remove the timing belt from a Gilera Nexus 500. First, remove the timing cover by unscrewing th…
Replacing Glove Box Light Bulb on Gilera Nexus 500
Replacing Glove Box Light Bulb on Gilera Nexus 500
Nexus 500 In this short video tutorial, you will see instructions on how to remove and replace the light bulb of the glove box (the one under the seat) on a Gi…

How to Replace the Clutch on a Kymco Downtown 125?

To replace the clutch on the Kymco Downtown 125, loosen the screws that secure the cover located on the left side of the bike, near the rear wheel. Once the screws are loosened, remove the cover to access the components underneath: the clutch at the rear can be removed by unscrewing the fixing screws and sliding out all the discs that make it up. At this point, insert the new replacement part, reposition the drive belt, and cover everything with the cover.

Watch the video!


by ScegliAuto

More videos