Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial we can see how to replace the engine oil in the Triumph Tiger 1200 Rally Explorer, an extremely simple and quick operation. First of all, make sure that the engine is cold enough, then remove the lower protective cover, locate the drainage hole bolt and unscrew it using a 7mm hex key. Let all the oil contained in the system drain out, unscrew the old filter and tighten both the replacement and the bolt. At this point, all that remains is to pour the necessary amount of oil through the appropriate upper hole.

Posted on 30 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the engine oil of the Triumph Tiger 1200 Rally Explorer?
How do you replace the engine oil of the Triumph Tiger 1200 Rally Explorer?
Tiger 1200 Rally Explorer To replace the engine oil of the Triumph Tiger 1200 Rally Explorer, you will need to unscrew the drain plug of the oil pan located in the central low…
How to replace the transmission oil in the Triumph Tiger 1200 Rally Explorer?
How to replace the transmission oil in the Triumph Tiger 1200 Rally Explorer?
Tiger 1200 Rally Explorer In this tutorial we can see how to replace the transmission oil in the Triumph Tiger 1200 Rally Explorer, a very simple and fast operation. First of …
How to replace the battery of the Triumph Tiger 1200 Rally Explorer remote control?
How to replace the battery of the Triumph Tiger 1200 Rally Explorer remote control?
Tiger 1200 Rally Explorer In this tutorial we can see how to replace the battery of the remote control of the Triumph Tiger 1200 Rally Explorer, an extremely simple and quick …

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos