Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, see how to replace the front headlamp bulb on a Harley-Davidson 883, a straightforward and quick operation. First, ensure the key is not inserted, then remove the outer ring of the headlamp by unscrewing the relevant bolt. Next, separate the headlamp from the base, disconnect the power connector, and remove the large rubber cap. At this point, release the metal clip, extract the old bulb, and insert the replacement, avoiding direct contact with the glass. To reassemble everything, simply follow the reverse procedure.

Updated on 5 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlamp on a Harley-Davidson 883?
How to replace the front headlamp on a Harley-Davidson 883?
883 .. how to replace the front headlamp on a Harley-Davidson 883, a very simple and quick operation. First, ensure the key is not inserted for safety, then.. …
How to Replace the Headlight on a Harley Davidson 883
How to Replace the Headlight on a Harley Davidson 883
883 .. how to replace the headlight on a Harley Davidson 883. First, remove the headlight by unscrewing the two screws and rotating the ring to extract.. …
How to Replace the Seat on a Harley Davidson 883
883 .. To replace the seat on the Harley Davidson 883, remove the bolt located at the rear of the seat. This removal will allow you to lift the.. …

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos