Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, see how to replace the front headlamp on a Harley-Davidson 883, a very simple and quick operation. First, ensure the key is not inserted for safety, then position yourself in front of the lamp, locate the fixing screw at the bottom, and unscrew it. Next, remove the outer trim, separate the headlamp from the base, and disconnect the power connector. At this point, connect the replacement and follow the reverse procedure to reassemble everything.

Updated on 28 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlamp Bulb on a Harley-Davidson 883
How to Replace the Front Headlamp Bulb on a Harley-Davidson 883
883 .. to replace the front headlamp bulb on a Harley-Davidson 883, a straightforward and quick operation. First, ensure the key is not inserted, then remove.. …
How to Replace the Headlight on a Harley Davidson 883
How to Replace the Headlight on a Harley Davidson 883
883 .. how to replace the headlight on a Harley Davidson 883. First, remove the headlight by unscrewing the two screws and rotating the ring to extract.. …
How to Replace the Rear Suspension on a Harley Davidson 883
How to Replace the Rear Suspension on a Harley Davidson 883
883 .. Before you begin, lift your Harley Davidson 883. Start by unscrewing and removing the upper bolt that secures the suspension to the upper.. …

How to Turn Off the "V-Belt" Warning Light on a Yamaha X-MAX 400 Scooter?

In this tutorial, learn how to turn off the "V-Belt" warning light on the Yamaha X-MAX scooter's instrument panel, a very simple and quick operation. Before doing this, ensure you have completed the required maintenance, specifically replacing the drive belt. Start by inserting the key and turning on the ignition, then open the small right glove compartment and unscrew the screw for the upper cover. Once removed, locate the white connector with a jumper attached, disconnect it, wait about 10 seconds, and reconnect it. If successful, the warning light will disappear.

Watch the video!


by ScegliAuto

More videos