Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the USB socket on the Benelli TRK 502, loosen the screws securing the left side panel of the motorcycle, located just below the handlebars: once this panel is freed, you can remove it and locate the USB socket connector. By disconnecting this connector, you can pull the socket out of its housing: then connect the new socket to the connector, inserting it into its housing. After installation, check that the socket works by reinstalling the panel.

Updated on 5 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Engine Light on a Benelli TRK 502
How to Reset the Engine Light on a Benelli TRK 502
Trk 502 Before you can begin, sit on the seat of your Benelli TRK 502. Start by setting the engine start switch to the active position. Then, fully rotate an…
How to Replace the Seat on a Benelli TRK 502?
How to Replace the Seat on a Benelli TRK 502?
Trk 502 To replace the seat on a Benelli TRK 502, first remove the screws that secure it. This allows you to lift the rear of the seat, and then detach the f…
How to Replace the Sprocket on a Benelli TRK 502?
How to Replace the Sprocket on a Benelli TRK 502?
Trk 502 To replace the sprocket on a Benelli TRK 502, first remove the bolts securing the sprocket cover using a Torx key. Next, use a screwdriver to pry and…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos