Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Benelli Trk 502 - Video guides

Benelli Trk 502
How to install additional spotlights on the Benelli TRK 502
This guide provides the main instructions on how to install additional spotlights or fog lights on the Benelli TRK 502 motorcycle. First, gather the necessary …Read all…
Posted on 11 September 2026 by ScegliAuto
Benelli Trk 502
How to Install Additional or Fog Lights on the Benelli TRK 502
Today, we will go through the instructions for installing additional or fog lights on the Benelli TRK 502 motorcycle. First, place the motorcycle on its centre …Read all…
Posted on 5 July 2026 by ScegliAuto
Benelli Trk 502
How to Replace the Radiator and Coolant Hoses on the Benelli TRK 502
This guide provides instructions for replacing the radiator and engine coolant hoses on the Benelli TRK 502 motorcycle. First, place the motorcycle on the …Read all…
Posted on 21 May 2026 by ScegliAuto
Benelli Trk 502
How to Set the Time on the Benelli TRK 502?
In this tutorial, you will see how to set the time on the Benelli TRK 502, an extremely simple and quick operation, to be done, for example, after …Read all…
Posted on 23 April 2026 by ScegliAuto
Benelli Trk 502
How to Change the Engine Oil on a Benelli TRK 502
To perform the engine oil change on the Benelli TRK 502, you will need to unscrew the oil drain plug located at the bottom of the vehicle: this can be removed …Read all…
Posted on 15 April 2026 by ScegliAuto
Benelli Trk 502
Additional Control Unit on Benelli TRK
In this video, we will look at an additional control unit for the Benelli TRK, which can be found on eBay under code 353532163799 for £100.00, with free …Read all…
Posted on 8 April 2026 by ScegliAuto
Benelli Trk 502
How to Set the Time on Benelli TRK 502
In this tutorial, we will see how to set the time on the Benelli TRK 502, a very simple and quick operation, to be performed after disconnecting the battery or …Read all…
Posted on 29 March 2026 by ScegliAuto
Benelli Trk 502
How to Replace the Exhaust on a Benelli TRK 502
To completely free the exhaust fitted on the Benelli TRK 502, unscrew the bolts securing the exhaust end can to its housing: this component can then be removed …Read all…
Posted on 23 March 2026 by ScegliAuto
Benelli Trk 502
How to Replace the Front Brake Pads on the Benelli TRK 502
You can replace the front brake pads on the Benelli TRK 502 by loosening the screws that secure the brake caliper to the corresponding disc. Once the caliper …Read all…
Posted on 7 March 2026 by ScegliAuto
Benelli Trk 502
How do you replace the muffler of the Benelli TRK 502X?
The exhaust installed on the Benelli TRK 502X can be replaced by loosening the screws that secure the component to its housing, which is located on the right …Read all…
Posted on 24 December 2025 by ScegliAuto
Benelli Trk 502
How do you replace the battery of the Benelli TRK 502?
It will be possible to replace the battery of the Benelli TRK 502 by removing the seat from its corresponding housing, unlocking the side lock of the seat by …Read all…
Posted on 3 December 2025 by ScegliAuto
Benelli Trk 502
How do you replace the muffler of the Benelli TRK 502?
The exhaust pipe of the Benelli TRK 502 can be replaced by loosening the screws that fix the component to its housing on the right side of the motorcycle: once …Read all…
Posted on 14 October 2025 by ScegliAuto
Benelli Trk 502
How do you replace the engine oil of the Benelli TRK 502?
The oil change of the Benelli TRK 502 can be performed by loosening the drain plug located in the central lower part of the vehicle, allowing all the used oil …Read all…
Posted on 30 September 2025 by ScegliAuto
Benelli Trk 502
How to change the engine oil of a Benelli TRK 502X?
To change the motor oil of a Benelli TRK 502X, start by briefly warming up the engine to make the oil more fluid and facilitate its drainage. Turn off the …Read all…
Posted on 4 February 2026 by ScegliAuto
Benelli Trk 502
How do you replace the exhaust pipe of the Benelli TRK 502?
To replace the exhaust of the Benelli TRK 502, you need to loosen the screws that attach the exhaust terminal to its housing, on the right side of the bike …Read all…
Posted on 8 July 2025 by ScegliAuto
Benelli Trk 502
How do you replace the exhaust pipe of the Benelli TRK 502?
The replacement of the exhaust pipe of the Benelli TRK 502 can be carried out by loosening the screws that fix the exhaust terminal to its housing: this can be …Read all…
Posted on 29 June 2025 by ScegliAuto
Benelli Trk 502
How to change the motor oil of a Benelli TRK 502?
To change the motor oil of a Benelli TRK 502, start by making sure you have the correct oil and a container to collect the used oil. Park the motorcycle on a …Read all…
Posted on 23 June 2025 by ScegliAuto
Benelli Trk 502
How do you replace the coolant of the Benelli TRK 502?
It will be possible to replace the coolant of the Benelli TRK 502 by widening the ring that connects the sleeve for the passage of the liquid to the rest of …Read all…
Posted on 25 May 2025 by ScegliAuto
Benelli Trk 502
How do you reset the ECU of the Benelli TRK 502?
In order to reset the ECU of the Benelli TRK 502, you need to connect a scanner to the vehicle's OBD port: this port will be located between the instrument …Read all…
Posted on 18 May 2025 by ScegliAuto
Benelli Trk 502
How to replace the engine oil in the Benelli TRK 502 X?
In this tutorial we can see how to replace the engine oil in the Benelli TRK 502 X, an extremely simple and quick operation. First of all, we wait for the …Read all…
Posted on 7 May 2025 by ScegliAuto

See also:

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos