Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Pads on the Benelli TRK 502

Model: Benelli Trk 502
Part: Brake pads

Video tutorial

You can replace the front brake pads on the Benelli TRK 502 by loosening the screws that secure the brake caliper to the corresponding disc. Once the caliper is removed from its position, you can detach the pin that holds the pads inside the caliper, allowing you to remove them completely.

After removing the pads, you can place the new ones inside the caliper: this can now be repositioned onto the disc so that it can be secured, and check that everything is functioning correctly.


Posted on 7 March 2026 by ScegliAuto


Related tutorials

How to Replace the Front Brake Pads on a Benelli TRK 502
How to Replace the Front Brake Pads on a Benelli TRK 502
Trk 502 To replace the front brake pads on a Benelli TRK 502, remove the pins located at the top and bottom of the caliper to free the pads inside. Once the …
How to Replace the Rear Brake Pads on the Benelli TRK 502
How to Replace the Rear Brake Pads on the Benelli TRK 502
Trk 502 Today, we will go through the necessary instructions to remove and replace the rear brake pads on the Benelli TRK 502 motorcycle. First, place the mo…
How to Change the Brake Pads on a Benelli TRK 502
How to Change the Brake Pads on a Benelli TRK 502
Trk 502 To replace the brake pads on a Benelli TRK 502, first remove the speed sensor by unscrewing the bolt and disconnecting the corresponding wire. At thi…

How to Dismantle the Centre Fairing of the Piaggio MP3

Below are the instructions to dismantle and replace the centre fairing of the Piaggio MP3 500 and 250 scooter. First, place the scooter on its stand and start by removing the small side plastic cover, unscrewing the fixing screws located underneath. Then, remove the fuel cap and disconnect the centre fairing by unplugging the electrical connector found underneath, as shown in the video. At this point, replace and install the new fairing, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos