Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Brake Pads on the Benelli TRK 502

Model: Benelli Trk 502
Part: Brake pads

Video tutorial

Today, we will go through the necessary instructions to remove and replace the rear brake pads on the Benelli TRK 502 motorcycle. First, place the motorcycle on its centre stand and begin unscrewing the bolts securing the rear brake caliper, removing it from the bracket.

This will allow you to extract the old brake pads, as shown in the video. Next, clean the caliper of any residual dirt and install the new original brake pads accordingly.

Finally, refit the brake caliper by reversing the disassembly procedure!


Updated on 30 August 2026 by ScegliAuto


Related tutorials

Replacing Rear Brake Pads on a Benelli TRK 502
Replacing Rear Brake Pads on a Benelli TRK 502
Trk 502 Today, remove and replace the rear brake pads on a Benelli TRK 502 by following these steps. First, unscrew the bolts securing the rear brake caliper…
How to Replace the Rear Brake Pads on a Benelli TRK 502?
How to Replace the Rear Brake Pads on a Benelli TRK 502?
Trk 502 Today, we will go through the steps and main instructions on how to remove and replace the rear brake pads on the Benelli TRK 502 motorcycle. First, …
How to Change the Brake Pads on a Benelli TRK 502
How to Change the Brake Pads on a Benelli TRK 502
Trk 502 To replace the brake pads on a Benelli TRK 502, first remove the speed sensor by unscrewing the bolt and disconnecting the corresponding wire. At thi…

How to Replace the Gear Oil of the Piaggio Vespa PX 125

To replace the gear oil of the Piaggio Vespa PX 125, loosen the drain plug of the oil reservoir located at the bottom of the transmission casing on the right side of the scooter. Once the plug is loosened, collect all the used oil in a suitably positioned container until it has completely drained. Now, top up the oil through the breather located on the transmission casing using a pump. After adding the new oil, you can start the engine to check that everything is functioning properly.

Watch the video!


by ScegliAuto

More videos