|
Do it yourself
| |||
| ||||
|
Model: Benelli Trk 502
Today, remove and replace the rear brake pads on a Benelli TRK 502 by following these steps. First, unscrew the bolts securing the rear brake caliper; then disconnect the ABS sensor located below, and remove the brake caliper from the disc. At this point, extract the old brake pads and replace them with the correct new ones: clean off any carbon residue and insert the new pads in the correct orientation. Finally, reassemble everything, following the video until the end!
Updated on 2 April 2026 by ScegliAuto
Video tutorial
Related tutorials
Trk 502
To replace the front brake pads on a Benelli TRK 502, remove the pins located at the top and bottom of the caliper to free the pads inside. Once the …
Trk 502
To replace the rear brake pads on a Benelli TRK 502, loosen the bolts securing the caliper so that it can be detached from the rear wheel disc. Once …
Trk 502
Today, we will go through the necessary instructions to remove and replace the rear brake pads on the Benelli TRK 502 motorcycle. First, place the mo…
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
