Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil and Oil Filter on a Keeway RKF 125

Model: Keeway Rkf 125
Part: Engine oil

Video tutorial

Today, we will go through the steps to perform routine maintenance by changing the engine oil and oil filter on a Keeway RKF 125. First, place the bike on a stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes.

Unscrew the screws of the oil filter cover, removing and replacing the cartridge with a new one as shown in the video.

At this point, unscrew the filler cap and pour in the new engine oil; start the engine and check that the level is at the maximum mark.


Posted on 7 November 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil and Oil Filter on a Keeway RKF 125
How to Change the Engine Oil and Oil Filter on a Keeway RKF 125
Rkf 125 Today, you will learn how to perform the routine maintenance service by changing the engine oil and oil filter on the Keeway RKF 125. First, place th…
How to change the engine oil and oil filter on the Keeway RKF 125
How to change the engine oil and oil filter on the Keeway RKF 125
Rkf 125 This guide provides instructions for performing the routine maintenance service of changing the engine oil and oil filter on the Keeway RKF 125 motor…
Engine oil and oil filter replacement for the Keeway RKF 125
Engine oil and oil filter replacement for the Keeway RKF 125
Rkf 125 Learn how to perform routine maintenance by replacing the engine oil and oil filter on the Keeway RKF 125. First, unscrew the oil drain bolt located …

How to replace the piston on a Derbi Senda 125?

To replace the piston on a Derbi Senda 125, completely remove the seat and take off all parts above the engine block. Next, disconnect the connectors and unscrew the bolts securing the cylinder to the top of the block, locating the piston inside. Remove the old piston from its connecting rod by loosening the retaining ring, and replace it with a new spare part. Finally, reassemble all the components that were removed earlier.

Watch the video!


by ScegliAuto

More videos