Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, you will see how to change the engine oil in the Peugeot Speedfight 125 scooter, a very simple and quick operation. Before proceeding, ensure that the engine is completely cold for safety. Start by placing a container underneath the scooter, then unscrew the drain bolt located in the lower left area. Once all the oil has drained out, reinsert the bolt, remove the filter, and clean it of any residue. At this point, you can insert new 5W-40 oil through the upper filling hole.

Updated on 4 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Variator from the Peugeot Speedfight 4
Removing the Variator from the Peugeot Speedfight 4
Speedfight 4 In this brief and simple guide, you will find instructions to remove and replace the variator on the Peugeot Speedfight 4 scooter. First, place your …
How to Remove the Exhaust from the Peugeot Speedfight 4
How to Remove the Exhaust from the Peugeot Speedfight 4
Speedfight 4 Today, follow this brief and simple guide for instructions on how to remove and replace the exhaust of the Peugeot Speedfight 4 scooter. First, place…
How to Remove and Replace the Thermostat on the Peugeot Speedfight 4
How to Remove and Replace the Thermostat on the Peugeot Speedfight 4
Speedfight 4 Today's guide will show you the steps to remove and replace the thermostat and coolant on the Peugeot Speedfight 4 scooter. First, place the scooter …

How to Replace the Rear Indicator Bulb on the Sym Mio

To replace the rear indicator bulb on the Sym Mio, you need to loosen the screws that secure the rear fairing of the motorcycle: to do this, you will also need to open the under-seat compartment and loosen the screws that secure the fairing from the inside. Once it is released, you can completely detach it and disconnect the connector attached to the corresponding bulb. The bulb can now be extracted from its housing, allowing you to insert the new one: this way, you can reassemble all the removed parts to ensure everything works correctly.

Watch the video!


by ScegliAuto

More videos