Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Piaggio Mp3 500
Part:

Below are the instructions to dismantle and replace the centre fairing of the Piaggio MP3 500 and 250 scooter. First, place the scooter on its stand and start by removing the small side plastic cover, unscrewing the fixing screws located underneath. Then, remove the fuel cap and disconnect the centre fairing by unplugging the electrical connector found underneath, as shown in the video. At this point, replace and install the new fairing, applying the reverse procedure for reassembly!

Updated on 5 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the front fairing of the Piaggio MP3 500 - Gilera Fuoco 500
How to disassemble the front fairing of the Piaggio MP3 500 - Gilera Fuoco 500
Mp3 500 Today we will see the steps that will allow us to disassemble the front fairing or shield of the Piaggio MP3 500 scooter, but also of the Gilera Fuoc…
How to Dismantle the Front Part of the Piaggio MP3 500
How to Dismantle the Front Part of the Piaggio MP3 500
Mp3 500 Here is how the Piaggio MP3 500 motorcycle looks after removing the front fairing, whether to repair electrical components or mechanical parts, or be…
How to Replace the Rear Brake Disc of the Piaggio MP3 500
How to Replace the Rear Brake Disc of the Piaggio MP3 500
Mp3 500 Below are the main instructions for removing and replacing the rear brake disc of the Piaggio MP3 500 scooter. First, place your scooter on the centr…

How to replace the engine oil in the Kawasaki Versys 1000?

As we can see in this tutorial, replacing the motor oil in the Kawasaki Versys 1000 is an extremely simple and fast operation. First of all, make sure that the engine is cool enough, then position a container under the motorcycle and, using a socket wrench, unscrew the drain plug. Wait for all the oil in the system to completely drain out, remove the lower front cover and unscrew the old filter. At this point, we can tighten the replacement, reassemble everything and pour in the new oil through the appropriate hole.

Watch the video!


by ScegliAuto

More videos