Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Piaggio Mp3 500
Part:

Today we will see the steps that will allow us to disassemble the front fairing or shield of the Piaggio MP3 500 scooter, but also of the Gilera Fuoco 500. First of all, we put the scooter on the central stand and start by removing the possible windshield, unscrewing the fixing screws; we then remove the central nose fairing, as shown in the video. At this point, we unscrew the screws of the fairing that we find underneath to remove it, replacing if necessary the plastics with new ones; we then follow the order of reassembly, fixing the fairings with the screws, applying the reverse procedure.

Posted on 9 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Dismantle the Front Part of the Piaggio MP3 500
How to Dismantle the Front Part of the Piaggio MP3 500
Mp3 500 Here is how the Piaggio MP3 500 motorcycle looks after removing the front fairing, whether to repair electrical components or mechanical parts, or be…
Replacing the Headlight Bulb on a Piaggio MP3 500
Replacing the Headlight Bulb on a Piaggio MP3 500
Mp3 500 In this brief and simple guide, we will see how to replace the headlight bulb on the Piaggio MP3 500 scooter. First, place your scooter on the centre…
How to Replace the Battery of the Piaggio MP3 500
How to Replace the Battery of the Piaggio MP3 500
Mp3 500 In this brief and simple guide, you will find instructions to remove and replace the battery of the Piaggio MP3 500 scooter. First, place your scoote…

How to Replace the Battery of the Kymco Agility 125?

To replace the battery of the Kymco Agility 125, lift the seat to access the compartment underneath. At the rear of the under-seat compartment, you will find the battery under the corresponding panel. By unscrewing the screws that secure the panel, you can access the battery underneath, which must be freed from the corresponding securing screws and the appropriate power cables. Once the device is free, insert the new one, connecting and securing it properly, and cover everything with the panel.

Watch the video!


by ScegliAuto

More videos