Do it yourself
Frequently asked questions about cars and motorcycles
Below are the main instructions for removing and replacing the rear brake disc of the Piaggio MP3 500 scooter. First, place your scooter on the central stand and begin to remove the rear wheel by unscrewing the fixing bolts; then unscrew the bolts of the brake disc to remove it, as shown in the video. At this point, install the new original brake disc, fit the brake caliper, and replace the brake pads accordingly, applying the reverse procedure for reassembly!

Updated on 16 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Mp3 500 To replace the front brake pads on a Piaggio MP3 500, loosen the bolts securing the brake caliper, which is located on the inside of the wheel. By lo…
Mp3 500 To replace the rear brake pads on a Piaggio MP3, first loosen the bolts securing the exhaust to its housing, removing it to access the components at …
Mp3 500 Here are the main instructions for draining and topping up the brake fluid on the Piaggio MP3 500 scooter. First, place the scooter on the central st…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos