|
Do it yourself
| |||
| ||||
|
Model: Piaggio Mp3 500
To replace the front brake pads on a Piaggio MP3 500, loosen the bolts securing the brake caliper, which is located on the inside of the wheel. By loosening these bolts, you can detach the caliper and extract the pads inside. At this point, insert the new pads into the caliper, position the caliper onto its disc, and secure it with the appropriate fixing screws. Finally, check that the front brake functions correctly after the replacement.
Updated on 12 June 2026 by ScegliAuto
Video tutorial
Related tutorials
Mp3 500
To replace the rear brake pads on a Piaggio MP3, first loosen the bolts securing the exhaust to its housing, removing it to access the components at …
Mp3 500
To replace the rear brake pads on a Piaggio MP3 500, first loosen the bolts securing the exhaust to its housing and remove it completely. Once the ex…
Mp3 500
Below are the main instructions for removing and replacing the rear brake disc of the Piaggio MP3 500 scooter. First, place your scooter on the centr…
|
How to Remove the Final Drive from a BMW R 1200 GS?
To remove the final drive from a BMW R 1200 GS, loosen the bolts securing the exhaust so it can be removed along with the rear wheel. The rear wheel will also be removed by unscrewing the five bolts that secure it to the swingarm. Next, detach the brake caliper by unscrewing the mounting bolts and remove the rear part of the swingarm. Inside, you will find the final drive, which should be extracted and replaced with a new spare part; after replacement, reassemble all previously removed components. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.010
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
