Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Piaggio Vespa Gts 300
Part:

This guide briefly outlines the steps to remove and replace the belt and rollers of the variator on the Piaggio Vespa GTS 300 scooter, following the instructions below. First, place your scooter on the centre stand and begin unscrewing the screws of the transmission cover to remove it; then unscrew the nut of the fan and that of the clutch bell, as shown in the video. At this point, remove the belt and then the variator, replacing the rollers found inside; install the new belt and reassemble the transmission!

Updated on 5 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rollers and Variator on the Piaggio Vespa GTS 300
How to Replace the Rollers and Variator on the Piaggio Vespa GTS 300
Vespa Gts 300 Today's guide will show you how to disassemble and replace the rollers and variator on the Piaggio Vespa GTS 300 scooter. First, place your scooter o…
How to replace the front suspension of the Piaggio Vespa GTS 300
How to replace the front suspension of the Piaggio Vespa GTS 300
Vespa Gts 300 Today we will discover the instructions that will allow us to disassemble and replace the front suspension of the Piaggio Vespa GTS 300 scooter. Firs…
How to Replace the Battery of the Piaggio Vespa GTS 300
How to Replace the Battery of the Piaggio Vespa GTS 300
Vespa Gts 300 Briefly review the instructions to remove and replace the battery of the Piaggio Vespa GTS 300 scooter. First, place the scooter on the centre stand …

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos