Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the engine oil of a Kymco Like 150i, position the vehicle on a stable surface, preferably using the center stand. Make sure the engine is warm, so that the oil can flow more easily. Locate the drain plug under the engine and loosen the bolt using a suitable wrench, placing a container underneath to collect the used oil. Let the oil drain completely, waiting a few minutes to ensure that all the liquid has drained out. Once finished, carefully tighten the drain plug, avoiding over-tightening it. Proceed with topping up, pouring the specified new engine oil from the manual, using a funnel to avoid spills. Check the oil level with the dipstick, making sure it falls within the indicated limits. Finally, start the engine for a few minutes and check for leaks, ensuring that the operation has been completed correctly.

Posted on 1 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil of the Kymco Like 150i?
How to Change the Engine Oil of the Kymco Like 150i?
Like 150i You can change the engine oil of the Kymco Like 150i by loosening the drain plug located at the central lower part of the vehicle: once this plug is …
How to change the engine oil and transmission oil of the Kymco Like 150i
How to change the engine oil and transmission oil of the Kymco Like 150i
Like 150i This guide briefly outlines the instructions for performing routine maintenance by changing the engine oil and transmission oil on the Kymco Like 150…
How to replace the transmission oil of the Kymco Like 150i
Like 150i In this short and simple guide, we will see how to replace the transmission oil of the Kymco Like 150i scooter. First of all, we put the scooter on t…

How to Replace the Tyres on the Husaberg FE 450

In this guide, follow the instructions to remove and replace the tyres on the Husaberg FE 450 enduro bike. First, place the bike on a stand and lift the wheel off the ground; then, undo the bolts securing the brake caliper to remove it, as shown in the video. Next, unscrew the central axle of the wheel, removing the tyre from the rim (deflating it and using levers); then install the new tyre, ensuring it has the correct dimensions, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos