Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
The replacement of the exhaust of the Ducati Monster 696 is done by loosening the screws that fix the exhaust terminal to its supports: these screws will be located on the right side of the bike, near the fender. Once these screws have been unscrewed, it will be possible to proceed by widening the ring that connects the terminal to the collector, so that it can be completely released: after removing the old exhaust, it will be possible to insert the new one, connecting and fixing it properly. At the end of the installation, the functioning of the system must be checked.

Posted on 22 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Silencer on a Ducati Monster 696
How to Replace the Silencer on a Ducati Monster 696
Monster 696 This guide will show you how to remove and replace the silencer on a Ducati Monster 696 motorcycle, following the instructions below. First, place yo…
How to Replace the Timing Belt on a Ducati Monster 696
How to Replace the Timing Belt on a Ducati Monster 696
Monster 696 Today's guide illustrates how to remove and replace the timing belt on a Ducati Monster 696, following the instructions provided below. First, place …
How to replace the battery of the Ducati Monster 696
How to replace the battery of the Ducati Monster 696
Monster 696 Below we will see the instructions that will allow us to disassemble and replace the battery of the Ducati Monster 696. First, we put the motorcycle …

How to Replace the Spark Plug in a Yamaha FZ 150

In this tutorial, you will see how to replace the spark plug in a Yamaha FZ 150, an extremely simple and quick operation. First, wait until the engine is sufficiently cool and ensure the key is not inserted. Then, move to the right side of the motorcycle and locate the spark plug. Disconnect the power connector, grasp the spark plug with a 16mm socket, and carefully unscrew it. At this point, insert the replacement, tighten it without applying excessive force, and reconnect the connector. Finally, start the engine to verify that the new spark plug functions correctly.

Watch the video!


by ScegliAuto

More videos