Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Mt 10
Part: Engine oil

In this tutorial we can see how to replace the engine oil in the Yamaha MT-10, a very simple and quick operation. First of all, make sure that the engine is cold enough, then place a container under the motorcycle, locate the drain hole bolt and unscrew it using a 6mm hex key. Let all the oil in the system drain out, unscrew the old filter and tighten both the replacement and the bolt. At this point, all that's left to do is to pour the necessary amount of oil through the designated top hole.

Posted on 23 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil in the Yamaha MT-10?
How to Change the Engine Oil in the Yamaha MT-10?
Mt 10 In this tutorial, learn how to change the engine oil in the Yamaha MT-10, a very simple and quick operation. First, ensure the engine is sufficiently…
How to Change the Engine Oil in a Yamaha MT-10?
How to Change the Engine Oil in a Yamaha MT-10?
Mt 10 In this tutorial, you will see how to change the engine oil in a Yamaha MT-10, a very simple and quick operation. First, ensure that the engine is su…
How to Change the Engine Oil and Oil Filter on the Yamaha MT-10
How to Change the Engine Oil and Oil Filter on the Yamaha MT-10
Mt 10 Today, we will go through the necessary guide on how to perform routine maintenance by changing the engine oil and oil filter on the Yamaha MT-10. Fi…

How to Reset the Service on the Husqvarna FE 350?

In this tutorial, you will see how to reset the service on the Husqvarna FE 350, a very simple and quick operation. Before proceeding, ensure you have completed all required scheduled maintenance tasks. Start by inserting the key and turning on the instrument panel; it is not necessary to start the engine. Then, repeatedly press the button located to the right of the display until you reach the odometer reading "ODO". Once done, press and hold the opposite button for about 5 seconds, and when the screen changes, press the right button again.

Watch the video!


by ScegliAuto

More videos