Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight Bulb of the Ducati Monster 696

Model: Ducati Monster 696
Part: Headlight bulb

Video tutorial

Today, we will go through the steps to remove and replace the front headlight bulb of the Ducati Monster 696, following the instructions below. First, place your motorcycle on a stand and start unscrewing the screws securing the headlight, located on the sides.

Then, disconnect the electrical connector of the bulb found at the back, as shown in the video. Now, remove and replace the headlight bulb with a new one of the correct type and fitting; reconnect the bulb and reassemble the headlight to complete the operation!


Updated on 8 August 2026 by ScegliAuto


Related tutorials

Guide to Replacing the Front Headlamp Bulb of the Ducati Monster 696
Guide to Replacing the Front Headlamp Bulb of the Ducati Monster 696
Monster 696 Today's instructions will show you the main steps for removing and replacing the front headlamp bulb of the Ducati Monster 696 motorcycle. First, pla…
How to Replace the Battery of the Ducati Monster 696
How to Replace the Battery of the Ducati Monster 696
Monster 696 Today we will discover the instructions that will allow us to disassemble and replace the battery of the Ducati Monster 696 motorcycle in simple step…
How to replace the spark plugs on a Ducati Monster 696
How to replace the spark plugs on a Ducati Monster 696
Monster 696 In this guide, we will see how to replace the spark plugs on the Ducati Monster 696 engine, following the instructions below. First, place your motor…

How to change the engine oil in the Yamaha MT-10?

In this tutorial, you will see how to change the engine oil in the Yamaha MT-10, a very simple and quick operation. First, ensure that the engine is cool enough, then position a container underneath the bike, locate the drain bolt, and unscrew it using a 6mm hex key. Allow all the oil in the system to drain out, unscrew the old filter, and tighten both the new filter and the bolt. At this point, simply pour in the required amount of oil through the designated upper hole.

Watch the video!


by ScegliAuto

More videos