Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Gilera Sp 02
Part: Engine

To disassemble the engine of the Gilera SP 02, you need to loosen the screws that fix the engine block to its housing so that it can be removed: to do this, you also need to disconnect the intake and exhaust manifolds, disconnecting their connectors. At this point, it will be possible to remove the cylinder and the cylinder head, detaching the piston from the corresponding connecting rod: this will give access to the crankshaft and it will be possible to replace all necessary components. Finally, you can close the engine again, checking that everything is functioning properly.

Posted on 23 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you disassemble the engine of the Gilera SP-02?
How do you disassemble the engine of the Gilera SP-02?
Sp 02 In order to disassemble the engine of the Gilera SP-02, you need to loosen the screws that fix the engine block to its housing located in the center …
How to Dismantle the Engine of the Gilera SP 02?
How to Dismantle the Engine of the Gilera SP 02?
Sp 02 You can dismantle the engine of the Gilera SP 02 by loosening the bolts that secure it to the supports. Then, disconnect all connectors and remove th…
How do you disassemble the gearbox of the Gilera SP 02?
How do you disassemble the gearbox of the Gilera SP 02?
Sp 02 In order to disassemble the gearbox of the Gilera SP 02, you need to loosen the screws that secure the gearbox housing to its mounting: this will be …

How to Remove the Rear Wheel on the BMW G650 GS?

In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer.

Watch the video!


by ScegliAuto

More videos