Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you disassemble the gearbox of the Gilera SP 02?

Model: Gilera Sp 02
Part: Transmission

Video tutorial

In order to disassemble the gearbox of the Gilera SP 02, you need to loosen the screws that secure the gearbox housing to its mounting: this will be located on the bottom of the bike immediately connected to the engine block. It will be possible to proceed by also disconnecting all the connectors, in order to remove the gearbox housing and open it: the gears and bearings inside can then be removed and possibly replaced with new parts.

After the replacement, the housing must be closed and checked to ensure that everything is functioning correctly.


Posted on 23 July 2025 by ScegliAuto


Related tutorials

How to Dismantle the Engine of the Gilera SP 02?
How to Dismantle the Engine of the Gilera SP 02?
Sp 02 You can dismantle the engine of the Gilera SP 02 by loosening the bolts that secure it to the supports. Then, disconnect all connectors and remove th…
How do you disassemble the engine of the Gilera SP 02?
How do you disassemble the engine of the Gilera SP 02?
Sp 02 To disassemble the engine of the Gilera SP 02, you need to loosen the screws that fix the engine block to its housing so that it can be removed: to d…
How do you disassemble the engine of the Gilera SP-02?
How do you disassemble the engine of the Gilera SP-02?
Sp 02 In order to disassemble the engine of the Gilera SP-02, you need to loosen the screws that fix the engine block to its housing located in the center …

How to Replace the Brake and Clutch Levers on a Kawasaki Z750

Briefly follow these instructions to remove and replace the front brake and clutch levers on the Kawasaki Z750 motorcycle. First, place your motorcycle on a stand and start by unscrewing the pin for the front brake lever, loosening the nut located at the bottom; remove and replace the lever with a new one, securing it properly and finally adjusting the lever travel as shown in the video. Similarly, replace the clutch lever by unscrewing the pin; in this case, attach the metal cable to the lever and make the adjustment using the adjuster!

Watch the video!


by ScegliAuto

More videos