Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. : Gearbox

Gearbox - Do-it-yourself video guides

Suzuki Sv 650
How do you replace the gear lever on the Suzuki SV 650?
In order to replace the gear lever on the Suzuki SV 650, you must access the left side of the motorcycle, in the lower central left part of the fairing: here …read all…
Posted on 17 May 2024 by ScegliAuto
Bmw R 1250 Gs
How do you replace the battery of the BMW R 1250 GS remote control?
In order to replace the battery of the BMW R 1250 GS remote control, you need to extract the key from inside its housing, so that you can leverage it inside …read all…
Posted on 1 October 2023 by ScegliAuto
Honda X Adv
How to reset the DCT gearbox on the Honda X-ADV?
In this tutorial, we can see how to reset the dual-clutch transmission in the Honda X-ADV, simply known as the DCT. This procedure should be done in case of …read all…
Posted on 9 September 2023 by ScegliAuto
Triumph Bonneville T100
How do you replace the gear lever of the Triumph Bonneville T100?
To replace the gear lever of the Triumph Bonneville T100, you need to loosen the nut located at the end of the pin that fixes the gear lever to the …read all…
Posted on 27 May 2023 by ScegliAuto
Derbi Drd 50
How do you disassemble the gearbox of the Derbi DRD 50?
In order to disassemble the gearbox of the Derbi DRD 50 it is necessary to completely remove the engine block and the transmission from inside its housing, by …read all…
Posted on 11 May 2023 by ScegliAuto
Ktm Duke 200
How do you replace the KTM Duke 200 shift lever?
In order to replace the KTM Duke 200 gear lever, it must be located on the right side of the bike, in the lower central part near the pedal crank for foot …read all…
Posted on 25 November 2022 by ScegliAuto
Tm Racing Mx 125
How to disassemble the TM Racing MX 125 gearbox?
In order to disassemble the TM Racing MX 125 gearbox it is necessary to loosen all the screws that fix the two casings inside which it is possible to find the …read all…
Posted on 2 November 2022 by ScegliAuto
Malaguti Fifty Top
How do you disassemble the gearbox of the Malaguti Fifty?
In order to disassemble the gearbox of the Malaguti Fifty it is necessary to loosen the bolts that secure the cover of the corresponding crankcase, positioned …read all…
Posted on 18 September 2022 by ScegliAuto
Piaggio Fly 150
Removal of the CVT on the Piaggio Fly.
Before removing the CVT (continuous, automatic gearbox) in the Piaggio Fly 150, we place our motorcycle in a stable and safe way (in this case on the stand), …read all…
Posted on 16 March 2024 by ScegliAuto
Kymco Agility 50
Gearbox oil replacement on Kymco Agility 50
As shown in the video, unscrew the lower pin of the gearbox and immediately unscrew the side screw from where, in the end, we will insert the new lubricant. …read all…
Posted on 6 March 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos