Do it yourself
Frequently asked questions about cars and motorcycles

How to open the trunk hatch locked in the Mercedes B-Class?

Model: Mercedes Classe B W245, MK 1 - Years 2005-2011
Part: Checks and maintenance

In the Mercedes Classe B, it may happen that the trunk hatch gets stuck, for example due to a problem with the control button or the lock actuator. In this case, we can perform the emergency opening by following the simple procedure shown in this tutorial. First, unlock the locks with the remote control, then open the rear doors and, by operating the indicated lever, lower the backrest of the seat. Then go inside the trunk, locate the indicated slot and manually unlock the lock using a small screwdriver.

Posted on 15 April 2025 by ScegliAuto

Video tutorial

Related tutorials

Mercedes Classe B (2005-2011 / W245, MK 1) .. to open the stuck bonnet of the Mercedes B-Class in case of emergency. First, pull the bonnet release lever; then, move to the front and remove.. …
Mercedes Classe B (2005-2011 / W245, MK 1) .. starting, open the tailgate of your Mercedes B-Class. Begin by prising off and removing the internal side cover of the boot. Once done, disconnect the.. …
Mercedes Classe B (2005-2011 / W245, MK 1) .. When the left rear headlamp bulb on a Mercedes B-Class does not light up, it needs replacing as soon as possible. To replace it, you must: - open the.. …

    Frequently Asked Questions

    • Classe B 2005-2011 - Where is the Mercedes B-Class yaw sensor located? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos