Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. : Checks and maintenance

Checks And Maintenance - Do-it-yourself vide
o guides

Peugeot 3008 (2016-2023 / )
The start and stop feature of the Peugeot 3008, how can it be permanently deactivated?

The Start and Stop device is designed to save fuel and reduce emissions of the car by automatically activating. When the vehicle is stopped, the engine shuts …read all…
Posted on 18 July 2025 by ScegliAuto
BMW Serie 3 (2005-2013 / )
How to check the water temperature of the BMW 3 Series

The following video tutorial will explain how to check the water temperature of the BMW 3 Series E91 model. To perform this operation, we need to turn on the …read all…
Posted on 18 July 2025 by ScegliAuto
Citroen C4 (2010-2018 / MK 2)
Where is the OBD2 port located in the Citroen C4?

To find the OBD2 port inside the cabin of your Citroen C4, simply follow the procedure described below. The entire operation takes just a few seconds. First, …read all…
Posted on 18 July 2025 by ScegliAuto
Renault Megane (2002-2010 / Megane2)
Injection control of Renault Megane II 1.5 DCi

In this video we can see that there is a malfunction in the injection system, which is reported under load (above 4,000 revolutions per minute), leading to the …read all…
Posted on 18 July 2025 by ScegliAuto
Kia Rio (2011-2017 / MK 3, UB)
Where is the VIN number located on the 2015 Kia Rio?

In this video we see where the legal chassis number (VIN = Vehicle Identification Number) is located on the 2015 Kia Rio: we open the passenger door (or the …read all…
Posted on 17 July 2025 by ScegliAuto
Kia Rio (2011-2017 / MK 3, UB)
MAP sensor position on Kia Rio 1.1 CRDI and 1.4 CRDI

In this video we can see where the MAP sensor is located on the Kia Rio CRDI: for the 1.1 engine (D3FA), it is located on the intake manifold, near the EGR …read all…
Posted on 17 July 2025 by ScegliAuto
Hyundai Accent (2005-2009 / MC, MK 2)
How to replace the heating resistor in the Hyundai Accent?

In this tutorial we can see how to replace the heating resistor in the Hyundai Accent, an extremely simple and quick operation. First of all, make sure that …read all…
Posted on 17 July 2025 by ScegliAuto
Ford Ford Various
How to use the Ford tire inflation kit

With the purchase of a Ford vehicle, it is possible to add the tire inflation kit. This kit includes an air compressor powered by the battery, a pressure …read all…
Posted on 17 July 2025 by ScegliAuto
Toyota Corolla (2019-2025 / E210, MK 5)
Crash test and Euro NCap results for the Toyota Corolla E210

In this video we can see the results of the crash tests of the Toyota Corolla e210, that is the one produced from 2019 onwards. In the Euro NCAP tests, it …read all…
Posted on 16 July 2025 by ScegliAuto
Dacia Duster (2017-2024 / HM, MK 2)
Where is the windshield washer fluid reservoir located on the Dacia Duster?

In this video we can see where to find the windshield washer fluid tank of the Dacia Duster MK2: let's take a look at the top corner on the right side of the …read all…
Posted on 16 July 2025 by ScegliAuto

How to remove the telepass holder from the windshield

Today we will explain how to remove the telepass holder from a vehicle's windshield. Removing the telepass holder from the windshield is a very simple and quick operation to perform independently, you just need to use nylon thread that you will need to pull towards the holder and pass it between the holder and the clip. After performing this operation, the holder will be removed. There may be glue residues on the windshield that can be removed with a solvent suitable for glass cleaning. After cleaning everything, it is possible to mount another telepass holder on the windshield in the same position as the one removed or elsewhere.

Watch the video!


by ScegliAuto

More videos