Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. : Oil vapor hose

Oil Vapor Hose - DIY video guides

Filter search by part
Renault Clio (1998-2005 / Clio2, MK 2)
Oil Vapour Recovery System on a Renault Clio 1.8 16V
In this video, we see how naturally aspirated engines (without a turbocharger) tend to emit oil vapours from the sump, which end up in the intake, …Read all…
Posted on 4 March 2026 by ScegliAuto
(Various brands) Various
How to Recover Oil Vapours from the Airbox
When changing the air filter of a vehicle, when fitting a sports one, a tube is left over: this is used to recover oil vapours, which are then reintroduced …Read all…
Posted on 4 February 2026 by ScegliAuto
Toyota Iq (2008-2015 / MK 1)
The importance of installing an oil vapor recovery system
In this video we can see how to install an oil vapor recovery canister. In this case, it is for a Toyota IQ, but the procedure is valid for all cars. We can …Read all…
Posted on 14 August 2025 by ScegliAuto
Audi Tt (1998-2006 / 8N, MK 1)
How to install an oil vapor recovery system on an Audi TT
In this video, we see how to install an oil vapor recovery device. In this case, it is installed on a 2000 Audi TT, but the concept is valid for all cars. This …Read all…
Posted on 3 July 2025 by ScegliAuto
(Various brands) Various
How to clean the PCV valve on our car
In this video we see how to do maintenance on the PCV (Positive Crankcase Ventilation) valve, which is used to recover oil vapors: the blow-by effect (or …Read all…
Posted on 19 June 2025 by ScegliAuto
Vauxhall Corsa (2000-2006 / Corsac)
How to Replace the Heat Exchanger Hose on an Opel Corsa
Before starting this procedure, it is strongly recommended to bleed the cooling system and remove the oil. Begin by removing the oil filter using a socket …Read all…
Posted on 1 May 2026 by ScegliAuto
Fiat Punto (1999-2011 / MK 2, 188)
Replacement of Oil Vapour Recovery Hose
Time, heat, and oil and petrol vapours wear out engine components, particularly rubber parts. Therefore, in case of a leak or oil vapour escape, it is …Read all…
Posted on 10 February 2026 by ScegliAuto

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos