Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Activate the Disabled TRC on the Toyota Yaris?

Model: Toyota Yaris MK 4 - Years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Checks and maintenance

See other generations:
Video tutorial

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started.

To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard.

To reactivate it, just press the same button again.


Updated on 2 August 2026 by ScegliAuto


Related tutorials

How to Disable the TRC System on a Toyota Yaris?
How to Disable the TRC System on a Toyota Yaris?
Toyota Yaris (2005-2011 / Xp90) To disable the TRC system, which is the traction control system, on a Toyota Yaris, start the car by inserting the ignition key. While the car is run…
How to activate and deactivate the TRC on a Toyota Yaris III.
How to activate and deactivate the TRC on a Toyota Yaris III.
Toyota Yaris (2011-2019 / Xp130) Let's see how to activate and deactivate the TRC system, which is the traction control, on a Toyota Yaris III: first, locate the button, which is fou…
How to Activate the Cruise Control on a Toyota Yaris
How to Activate the Cruise Control on a Toyota Yaris
Toyota Yaris (2020-2026 / MK 4) In this brief guide, you will find instructions on how to activate the cruise control system on the Toyota Yaris. First, get into the vehicle and acc…

    Frequently Asked Questions

    • Yaris 2011-2019 - Can I replace the ignition switch on my Toyota Yaris myself? and how much is it? Read answer
    • Yaris 2020-2027 - What problems does the 2020 Toyota Yaris Hybrid have? Read answer

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos