Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open the Fuel Filler Flap in the Hyundai i30?

Model: Hyundai I30 MK 1, FD - Years: 2007, 2008, 2009, 2010, 2011, 2012
Part: Fuel cap

See other generations:
Video tutorial

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed.

To close the flap, simply press it gently.


Updated on 6 November 2026 by ScegliAuto


Related tutorials

How to Open the Fuel Flap and Cap on the Hyundai i30
How to Open the Fuel Flap and Cap on the Hyundai i30
Hyundai I30 (2011-2016 / GD, MK 2) This guide will show you how to open the fuel flap and cap on the Hyundai i30. First, take your remote control and unlock all the door locks by press…
How to Open the Fuel Flap on the Hyundai i30
How to Open the Fuel Flap on the Hyundai i30
Hyundai I30 (2016-2024 / MK 3, PD) To refuel this car model, follow the simple steps outlined below. First, locate the fuel flap on the left side of the vehicle, just behind the rear w…
How to Replace the Cabin Air Filter on a 2021 Hyundai i30
How to Replace the Cabin Air Filter on a 2021 Hyundai i30
Hyundai I30 (2016-2024 / MK 3, PD) Replacing the cabin air filter on a 2021 Hyundai i30 is a very simple procedure. First, open the passenger door. Second, remove the glove compartment…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos