Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open the Fuel Flap on the Hyundai i30

Model: Hyundai I30 MK 3, PD - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Fuel cap

See other generations:
Video tutorial

To refuel this car model, follow the simple steps outlined below. First, locate the fuel flap on the left side of the vehicle, just behind the rear wheel.

When the vehicle is locked, the flap cannot be opened; once the central locking is released with the remote key, press the flap and it will release. You can then open it, unscrew the fuel cap, and refuel.

After completing the operation, close the flap by pressing it back into place.


Updated on 30 July 2026 by ScegliAuto


Related tutorials

How to Open the Fuel Flap and Cap on the Hyundai i30
How to Open the Fuel Flap and Cap on the Hyundai i30
Hyundai I30 (2011-2016 / GD, MK 2) This guide will show you how to open the fuel flap and cap on the Hyundai i30. First, take your remote control and unlock all the door locks by press…
How to Open the Fuel Filler Flap in the Hyundai i30?
How to Open the Fuel Filler Flap in the Hyundai i30?
Hyundai I30 (2007-2012 / MK 1, FD) In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of m…
How the Fuel Filter Primer Pump Works on the Hyundai i30
How the Fuel Filter Primer Pump Works on the Hyundai i30
Hyundai I30 (2011-2016 / GD, MK 2) The correct term is "manual fuel pump" and it is a black rubber bulb located on the fuel filter, which has two main functions: to bleed air from the …

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos